MRV to CS1K MGU Pinout
Use the following pinout for serial communications between an MRV and MG1010 MGU serial ports. This configuration works for either CPDC, CPPM, or MGC cards (slots 22, 23, and 0).
- 1 → 5
- 2 → 2
- 3 → 7
- 4 → 4
- 5 → 3
- 6 → 6
- 7 → 8
- 8 → 1
| MGU TTY | |||||||
|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
 |
 |
 |
 |
 |
 |
 |
 |
→
| MRV Port | |||||||
|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
|
|
|
|
|
|
The MGU TTY end is standard 568B. The MRV Port end is custom.
ADAN TTY TYPE: MGC, ports 0, 1, 2
On the MRV LX, use the following settings:
- Flow Control to "None"
- Banner to "None"
- Disable "AutoHangup"
- Change Prompt to empty string