Mike's PBX Cookbook

Norstar Components and parts

0x16

0x16 Fiber Station Module

The Norstar 0x16 Station Module is used to add 16 stations (phones) to the Norstar Modular ICS.

To connect an 0x16 to the MICS, you will need a fiber port on a 2 or 6 port expansion card.

ns_12x0.jpg (2506 bytes)

12x0 Fiber Trunk Module

The Norstar 12x0 Trunk Module holds up to 3 Trunk Cards. Each trunk card adds 4 incoming lines to you Norstar System making each trunk module capable of adding up to 12 more phone lines to your existing system.

To connect an 12x0 to the MICS, you will need a fiber port on a 2 or 6 port expansion card.

asm.jpg (2557 bytes)

Analog Station Module

The Norstar Analog Station Module is used to connect up to 8 analog devices to your Modular Norstar Telephone System. Typical analog devices connected are cordless phones, fax machines, answering machines.

To connect an ASM to the MICS, you will need a fiber port on a 2 or 6 port expansion card.

ns_portfiber.jpg (4300 bytes)

2 Port Expansion Card

The Norstar 2 Port Expansion Card is used to add 2 extra connections to the Modular ICS Cabinet so that you may connect 2 expansion modules, such as the 12x0 Trunk Module or 0x16 Station module.

ns_6port.jpg (3786 bytes)

6 Port Expansion Card

The Norstar 6 Port Expansion Card is used to add 6 extra connections to the Modular ICS Cabinet so that you may connect expansion modules, such as the 12x0 Trunk Module or 0x16 Station module.

6portcombo.jpg (4929 bytes)

6 Port Combination Expansion Card

The Norstar 6 Port Combo expansion card is both a Service Card (T-1 Clock Controller) and a 6 Port Expansion card. It allows you to connect up to six expansion modules and a T-1 card to your Norstar Modular ICS Cabinet.

lsds.jpg (4612 bytes)

LS/DS Trunk Card

The 4x0 LS/DS Trunk card is used to add 4 incoming lines to your Norstar Compact ICS, Modular ICS or 824 Cabinet. This card DOES NOT utilize Caller ID. An different card is required for this.

t-1.jpg (2608 bytes)

T-1/PRI Expansion Card

The Norstar T-1 Digital Trunk Card adds a T-1 to your Norstar Mocular ICS Cabinet. You will also need a Service Card or a 6 Port Combo Card in order to add a T-1 to your telephone System.

ata.jpg (2903 bytes)

Analog Terminal Adapter (ATA)

Analog Terminal Adapter's will turn a digital Norstar jack into an analog jack. This will allow the Norstar user to run an analog device. For instance, an answering machine or a cordless telephone.

ata.jpg (2903 bytes)

Remote Access Device

The Norstar RAD, or FastRAD, provides an RS232 port, and is used for maintenance personnel to connect to your Norstar system remotely.