Speed Call Quick Ref.
Speed Call allows you to place calls with a one-, two-, or three-digit code. You can use Speed Call for both internal and external calls. System Speed Call is Speed Call 'enhanced', it temporarily overrides the users class of service: an NCOS for the list is entered in LD 18.
- Speed Call: TYPE: SCL - KEY: SCU user / SCC controller
- System Speed Call: TYPE: SCC - KEY: SSU user / SSC controller *
Don't mix them up when programming! Digital sets: KEY, Analog sets: FTR.
A 'controller' can edit the list, * System Speed Call controllers are digital sets only.
System Speed Call:
LD 18 REQ NEW TYPE SSC LSNO X list number NCOS X NCOS for list DNSZ XX max # digits SIZE XX max # entries STOR 0 XXXXXXXXXX + access code STOR 1 XXXXXXXXXX
Speed Call Lists:
LD 18 REQ NEW TYPE SCL LSNO X DNSZ XX SIZE XX STOR 0 XXXXXXXXXX STOR 1 XXXXXXXXXX
Print Feature Codes:
LD 57 REQ PRT TYPE FFC CODE ALL Print ALL Feature Codes
OUT/CHG Feature Codes:
LD 57 REQ OUT or CHG TYPE FFC ALL CODE SPCC Speed Call Controller Code SPCC #2 CODE SPCE Speed Call Erase Code CODE SPCU Speed Call User Code CODE SSPU System Speed Call User Code
Phone Configuration:
LD 20 REQ CHG TYPE 3904 ECHG YES SSU XXXX System SC List # for dial access KEY X SSC XXXX System Speed Call Controller Key KEY X SSU XXXX System Speed Call User Key KEY X SCC XXXX Speed Call Controller Key KEY X SCU XXXX Speed Call User Key
Note: Use KEY 23 for 3903/3904/3905/i2004/1120/1140 sets.
Operation
Speed Call:
- Dial: Lift the handset and press the SCU/SCC key (or dial #3, or SPRE+76), enter the Speed Call code: the number is dialed automatically.
- Store (digital): Without lifting the handset, press SCC key, enter the Speed Call code, followed by the number, press SCC again.
- Store (analog): Lift the handset, dial #2, or SPRE+75, enter the Speed Call code, followed by the number, hangup.
System Speed Call:
- Dial: Lift the handset and press SSU/SSC key (or dial SPRE+73), enter the Speed Call code: the number is dialed automatically.
- Store: Without lifting the handset, press SSC key, enter the Speed Call code, followed by the number, press SSC again.
- Analog phones cannot be System Speed Call controllers, so they cannot store System Speed Call codes.
See also: Speed Call and System Speed Call.