Programming Overview

Programming is restricted by the following user levels:

Profile - set the system profile, all programming is erased (default profile: North America).
Dialpad - determine the style of dialpad programming for your system.
Installer - access to all system programming, including networking features.
System Coordinator Plus - access to all but a few sensitive areas of programming.
System Coordinator - perform basic day-to-day administration functions
Admin/Basic - limited access, to change programming and control services.

The following provides an overview of the programming seen by each user level.

Profile, Dialpad and Startup programming

Profile:	`Feature` * * P R O F I L E (**7763453)
Dialpad:	`Feature` * * D I A L P A D (**3425723)
Startup:	`Feature` * * S T A R T U P (**7827887)
Default password: C O N F I G (266344)

Profile: Password: (CONFIG); Region: PROF1
OK CHANGE

Dialpad: Password: (CONFIG); QZ:0
CHANGE

Startup: Password: (CONFIG); Reset Memory?
YES; Template?
CHANGE; Start DN: 2221
CHANGE; Applying Template
(Install is complete when Date
and Time appear on display)

Installer or System Coordinator Plus programming

Entry code: Feature * * C O N F I G (**266344)
Installer password: C O N F I G (266344)
System Coordinator Plus password: S C P L U S (727587)

Startup: Template; Start DN
Terminals&Sets: Line access; Capabilities; Name; User prefernces; Restrictions; Telco features
Lines: Trunk/Line data; Name; Restrictions; Telco features
Services: Ringing service; Restrn service; Routing service; Common settings
Sys speed dial
Passwords: COS pswds; Call log pswds; Programing pswds

Passwords (cont'd): Reg. pswd; Hospitality; SM Passwrd
Time&Date
System programing: Hunt groups; Change DNs; Featr settings; Direct-dial; CAP/KIM assignment; Dialing Plan; Access codes; Remote access; Change DN type; Companion; Recd # length; DN length; BusName; CbC limits; Release reasons; Hospitality; Network Services; SM sets

Telco features: VMsg ctr tel#s; ONN blocking
Software keys: SysID; Password keys
Hardware: Cards on KSU; Mod 03 - Mod 14
Maintenance: System version; Port/DN status; Module status; Sys test log; Sys admin log; Network evt log; Provisioning; Tests; CSU stats; Diagnostic tools; Link status
Usage metrics: Hunt groups; Call-by-Call

DARK GREY - only seen only if using the Installer password: C O N F I G.
LIGHT GREY - only available with MICS-XC software (Companion wireless setup).

Some headings will only appear if the appropriate key-code has been entered: eg, Network Services requires the PRI and MCDN key-codes. Other settings are dependent on the trunk configuration: eg, CbC headings only appear if the NI-2 protocol is used on the DTI trunk card.

System Coordinator programming

Entry code: Feature * * C O N F I G (**266344)
Default System Coordinator password: A D M I N (23646)

Terminals&Sets: Capabilities; Name; User prefernces; Restrictions; Telco features
Lines: Name

Services: Ringing service; Restrn service; Routing service
Sys speed dial
Passwords: Call log pswds; Programing pswds

Reg. pswd*; Hospitality
Time&Date: System prgrming; Hunt groups; Companion*; BusName; Hospitality

LIGHT GREY - only available with MICS-XC software (Companion wireless setup).

Admin/Basic programming

Entry code: Feature * * U S E R (**8737)
Default Basic password: B A S I C (22742)