Identifying MSDL's

The following illustrates the difference in CS1000E and CS1000M MSDL hardware. A CS1000E doesn't have a network shelf.

• NT6D80 - (Core/Net) 4 ports for PRI D-Channel (DCH) and Application Module Link (AML). Port 0 can be used for SDI (TTY)
• NTBK51 - 2 port daughterboard, mounted on either the NTAK09 1.5 DTI/PRI card or NTBK50 2 Mb PRI digital trunk card
• NTDW79 - A UDT card has on-board DDCH/DCHI functionality (same as a NTBK51), use LD 96 commands with l s c

>ld 22

PT2000

REQ  prt

TYPE cequ                ← print 'common equipment'


CEQU
  SUPL V000 V004 V020 V024
       V216 V220 V252
  SUPC
  SUPF
  DDCS         MG_CARD
  XCT
  CONF
  MGTDS        IPMG  IPMG_TYPE
         101  000  0   MGC
         102  000  1   MGC
  MGCONF       IPMG  PORTS  IPMG_TYPE
         151  000  0   30    MGC
         152  000  1   30    MGC
  IPCONF       NODE
  IPTONE       NODE
  PRI2       MG_CARD   
      201    000  0  01     MG cards for PRI 'loops'
      202    000  1  01     each card has an MSDL
      203    000  0  02
  DTI2         MG_CARD
  MISP         MG_CARD
  SYNM 0
  EXT0  3PE
  EXT1  3PE
  MCFN  006 MB

REQ  ****

>ld 96

DCH000
.stat dch

DCH 201 : OPER       EST   ACTV  AUTO         DES : PTT_1
DCH 202 : OPER       EST   ACTV  AUTO         DES : PTT_2
DCH 203 : OPER       EST   ACTV  AUTO         DES : SITE2
.stat msdl

MSDL  000  0  1  ENBL       MSDL is on PRI card: l s c
MSDL  000  0  2  ENBL
MSDL  000  1  1  ENBL
.map dch

DCH 201 : IPMG 000 0  MSDL 01  PORT 1
DCH 202 : IPMG 000 1  MSDL 01  PORT 1
DCH 203 : IPMG 000 0  MSDL 02  PORT 1     same as CEQU

.stat msdl 0 0 1 full

MSDL  000  0  1  ENBL
   DCH     201  OPER        PORT 1
CARDID: NTBK51BA00
BOOTLOAD FW VERSION: 002
BASECODE VERSION: 073
         STATE:   ENABLED
         ACTIVATED: 03/03/20  9:04
APPLICATIONS:
         NAME:       PRIE
           VERSION:    087
           STATE:      ENABLED
           ACTIVATED: 03/03/20  9:05
         NAME:       IQSIG GF DATA FILE
           VERSION:    031
           STATE:      ENABLED
           ACTIVATED: 03/03/20  9:04

.

>ld 22

PT2000

REQ  prt

TYPE cequ                ← print 'common equipment'


CEQU 
  MPED 8D
  TERM 
  REMO 
  TERD 
  REMD 
  TERQ 
  REMQ 
  SUPL 004 012 020 V096 
  SUPC 
  SUPF 
  DDCS 
  DTCS 
  XCT   000  016 
  TDS  * 000 * 016 
  CONF * 001 * 017 
  MFSD * 000 * 016 
  PRI2 002 003 024       PRI 'loops', in network shelf
  APVL 
  DTI2 
  MISP 
  SYNM 0 
  EXT0  3PE
    CNI  009 000 000 
  EXT1  3PE
    CNI  009 000 000 
  MCFN  509 MB

REQ  ****

>ld 96

DCH000 
.stat dch

DCH 002 : OPER       EST   ACTV  AUTO         DES : PTT_1
DCH 003 : OPER       EST   ACTV  AUTO         DES : PTT_2
DCH 024 : OPER       EST   ACTV  AUTO         DES : SITE2
.stat msdl

GROUP 0  MSDL 8: ENBL     DNUM 8, physical card address

.map dch

DCH 002 : GROUP 00  MSDL 08  PORT 0  MSDL has 4 ports,
DCH 003 : GROUP 00  MSDL 08  PORT 1  cabled to PRI cards
DCH 024 : GROUP 00  MSDL 08  PORT 2

.stat msdl 8 full

GROUP 0  MSDL 8: ENBL
   DCH       2  OPER        PORT 0 
   DCH       3  OPER        PORT 1 
   DCH      24  OPER        PORT 2 
CARDID: NT6D80AB  01  NNTM1832MZ0S
BOOTLOAD FW VERSION: 006 
BASECODE VERSION: 073 
         STATE:   ENABLED 
         ACTIVATED: 03/03/20 17:01 
APPLICATIONS:
         NAME:       PRIE
           VERSION:    085 
           STATE:      ENABLED 
           ACTIVATED: 03/03/20 17:01 
         NAME:       ETSI DATA FILE
           VERSION:    048 
           STATE:      ENABLED 
           ACTIVATED: 03/03/20 17:01 

Command summary:

After a MSDL/DCH hardware (or configuration) change, always force download the required Loadware to the MSDL card with the FDL switch:enl msdl x fdl