Load Factory Defaults
Use the following key sequence to Reset a Nortel/Avaya IP set, and load the factory default values.
Note: Applies to: 2007, 1100 and 1200 series sets, with UNIStim firmware release 3.0, and greater.
* * R E N E W [MAC_address] # #
The MAC address is in HEX: press 2 for A, B or C, and press 3 for D, E, or F.
* * 7 3 6 3 9 [MAC_address] # #
You can find the MAC address on the label on the back of the set, or in the Local Tools Menu (HWID).
Press the Services key twice to access the 'Local Tools Menu', the default password is: [color*set]
Factory default values
| Parameter | Factory default value |
|---|---|
| Enable 802.1x (EAP) | Disabled |
| 802.1x Device ID | None |
| 802.1x Password | None |
| Enable 802.1ab (LLDP) | Yes |
| DHCP mode | On |
| Set IP | 0.0.0.0 |
| Net Mask | 0.0.0.0 |
| Gateway | 0.0.0.0 |
| S1 IP | 0.0.0.0 |
| S1 Port | 0 |
| S1 Action | 1 |
| S1 Retry | 255 |
| S1 PK | 0xffffffffffffffff |
| S2 IP | 0.0.0.0 |
| S2 Port | 0 |
| S2 Action | 1 |
| S2 Retry | 255 |
| S2 PK | 0xffffffffffffffff |
| Network Speed | Auto |
| Network Duplex Mode | Auto |
| Voice 802.1Q | Enabled |
| Voice VLAN Mode | DHCP Auto |
| Voice VLAN ID | 4095 |
| Voice Control pBit | 8 (Auto) |
| Voice Media pBit | 8 (Auto) |
| VLAN Filter | Disabled |
| Enable PC Port | Yes |
| PC Port Speed | Auto |
| PC Port Duplex Mode | Auto |
| Data 802.1Q | Enabled |
| Data VLAN Mode | Disabled |
| Data VLAN ID | 4095 |
| Data pBit | 8 (Auto) |
| PC-Port Untag All | Off |
| Stickiness | Enabled |
| Cached IP | Disabled |
| Ignore GARP | Disabled |
| PSK SRTP | Off |
| DiffServ Code Points for control message | 0 |
| DiffServ Code Points for media message | 0 |
| DiffServ Code Points Precedence Override | No |
| XAS IP | 0.0.0.0 |
| XAS Port | 0 |
| XAS Action | Gfs (graphical, full screen, and secure) |
| Primary DNS IP | 0.0.0.0 |
| Secondary DNS IP | 0.0.0.0 |
| Provisioning server IP | 0.0.0.0 |
| Provisioning server port | 0 |
| Provisioning server type | TFTP |
| UNID | None |
| Menu Lock | Auto Lock |
| Bluetooth (1140E, 1150E, and 1165E only) | Disabled |
| Zone ID | None |
| Read zone/type/device specific provisioning file | None |
| Contrast | 7 |
| Brightness (IP Phones 2007 and 1165E only) | 7 |
| Backlight | 1 hour |
| Display Dim Enabled | Off |
| Headset type | None |
| Auto recovery flag | On |
| Recovery level (not accessible in local menu) | Critical |
| Log level (not accessible in local menu) | Minor |
| CPU sampling rate (not accessible in local menu) | 180 seconds |
| SSH user ID | None |
| SSH password | None |
| Bold | Off |
| VPN | Disabled |
| Protocol | Contivity |
| Mode | Aggressive |
| Authentication type | PSK |
| PSK-User ID | None |
| PSK-Password | None |
| Xauth | None |
| Xauth User ID | None |
| Xauth Password | None |
| Primary Server | None |
| Secondary Server | None |
| VPN DSCP | 0 |
| VPN DSCP Copy | Do not copy |
| VPN MOTD | 0 |
| Local DNS | 0.0.0.0 |
| MSCR | N |
| Callrec | N |
| Slideshow | Off |
| Theme | Black theme (0) |
| Use Theme Background | Enabled |
| Use Font Smoothing | Enabled |
| Use Outlined Font | Disabled |
| GEM Bold Font | Enabled |
| Use Simple Icons | Disabled |
| Enable USB Port | Enabled |
| Lock USB Mouse | Disabled |
| Lock USB Keyboard | Disabled |
| Lock USB Headset | Disabled |
| Lock USB Flash Drive | Disabled |