SCH8900 - 8999
| SCH8900 | No FDTD table configured. |
| SCH8901 | COOP package is not equipped. |
| SCH8902 | Pointer to COOP_CPG_ICCOUNT array not defined. |
| SCH8904 | Cannot define a non-terminal loop as a GEC loop. |
| SCH8905 | Cannot set subtype if TYPE = TIE. |
| SCH8907 | Cannot use OUT command on console with ICP. |
| SCH8908 | Cannot use OUT command on a set with IPNA CLS. |
| SCH8909 | ICP already configured for this customer. |
| SCH8910 | Packages 35 (IMS), 40 (BACD), 46 (MWC), 109 (APL), 131 (SUPP), and 139 (FFC) must be included. |
| SCH8911 | Terminal/printer number is already used. |
| SCH8912 | Terminal/printer number out-of-range (0-99). |
| SCH8913 | ICP is not configured for this customer or tenant. |
| SCH8914 | FDTD table does not exist. |
| SCH8915 | Trying to remove a nonexistent digit sequence. |
| SCH8916 | Table full, no more sequences allowed. |
| SCH8917 | FDTD digit sequence already exists in table. |
| SCH8918 | FDTD table does not exist (REQ = OUT/CHG). |
| SCH8919 | FDTD table exists (REQ = NEW). |
| SCH8920 | OPCB package is restricted. |
| SCH8921 | Invalid entry for ALDN. ALDN can only be configured on a CHG command. |
| SCH8922 | DN conflicts with ALDN. |
| SCH8923 | Input number is out-of-range (0 - 10). Action: Choose a number 0 - 9. |
| SCH8924 | Category code out-of-range (1-10). |
| SCH8925 | No current entry in list. |
| SCH8926 | At least one of call types CDPC/TOLL/ALRM/TNDM/SSUC/NDGT must be set. This error
message may appear if NDGT is answered with 0(NDGT is now the last prompt among
SSDG’s call type marks). This error message may appear if SSUC is answered with NO
(SSUC is now the last prompt among SSDG’s call type marks). Action: Set at least one of the call types CDPC/TOLL/ALRM/TNDM/SSUC/NDGT |
| SCH8927 | SSL not applicable to move command. |
| SCH8928 | SSL list already full (100 entries). |
| SCH8929 | SSL entry out-of-range (0-9999). |
| SCH8930 | SSL entry does not exist. |
| SCH8931 | Category code out-of-range. |
| SCH8932 | List number out-of-range (0-15) |
| SCH8933 | SSL list does not exist |
| SCH8934 | HWTT input out-of-range (0-600). |
| SCH8936 | Same digit cannot be assigned to two programmable control digits. |
| SCH8948 | LAPW - Print Speed Call List is not allowed. |
| SCH8949 | Digital set cannot have LVXA Class of Service. |
| SCH8950 | ACD set cannot have LVXA Class of Service. |
| SCH8951 | Cannot have MTA and LVXA Class of Service. |
| SCH8952 | CMOP - Package is not equipped. |
| SCH8953 | TVT - Volume key may not be changed using Attendant Administration. |
| SCH8954 | TVT - Only one of Volume Up/Down keys are configured. |
| SCH8955 | TVT - Attempt to define a non-terminal loop as a TVT loop. |
| SCH8956 | TVT - Before changes to OGTPECL/DCTI must be reset. |
| SCH8957 | ICP data is not copied. |
| SCH8958 | This set does not have IPNA CLS. |
| SCH8959 | This set does not have IRGA CLS. |
| SCH8960 | ICP package 143 not equipped. |
| SCH8961 | PPM - Input value out-of-range (0-9999 inclusive). |
| SCH8962 | PPM - Input value out-of-range (0-15 inclusive). |
| SCH8963 | Warning: Port has been configured as a background terminal. |
| SCH8964 | PPM - Input value out-of-range. Value must be (0-3). |
| SCH8965 | PPM - Input value out-of-range. Value must be (0-7). |
| SCH8966 | PPM - Input value out-of-range. Value must be (0-28). |
| SCH8967 | PPM - Input value out-of-range. Value must be (0-23). |
| SCH8968 | PPM - Input not allowed; only allowed for daily print. |
| SCH8969 | PPM - No space allowed after second hour input. |
| SCH8970 | PPM - No prime DN specified. MRA CLS changed to MRD. |
| SCH8971 | PPM - MR package is not equipped. |
| SCH8972 | PPM - Meter associated with this set/route is being deleted. |
| SCH8973 | ALP - Input is out-of-range (0-7) for APAD in CDB. |
| SCH8974 | DTI2 - Route is not a 2.0 Mb/s digital route. |
| SCH8975 | DTI2 - PAD category does not exist. |
| SCH8976 | DTI2 - JDMI package not equipped. |
| SCH8977 | DTI2 - Route is not a JDMI route. |
| SCH8978 | DTI2 - 1.5 Mb/s DTI is invalid for private line routes. |
| SCH8979 | DTI2 - DTA is an invalid DSEL for RML and RLT routes. |
| SCH8985 | TBAR - Invalid group hunt member encountered all routes are assigned ART # O. |
| SCH8986 | SUPP package 131 not equipped. |
| SCH8987 | TBAR - ARTs do not exist. |
| SCH8988 | TBAR - out-of-range (1-63). |
| SCH8989 | TBAR - ART already exists. |
| SCH8990 | RAN, MUSIC, AWU, and CAS routes cannot be barred. |
| SCH8991 | AFBT cannot be greater than AFNT. |
| SCH8992 | MPO package is not equipped. |
| SCH8993 | AFBT is greater than AFNT, AFBT has been set to. |
| SCH8994 | Cannot delete ART as it is used as default. |
| SCH8995 | MCT & MFC packages must be equipped. |
| SCH8996 | RART, REQ = NEW, or OUT is disallowed. New routes are created/removedusing LD 16. |
| SCH8997 | 0, 1, and 2 are the only inputs allowed for RVDL. |
| SCH8998 | RCDT, REQ = NEW, or OUT is disallowed. |