SCH5900 - 5999
| SCH5900 | The appropriate DSL on this card (DSL #0 for PREF or DSL #1 for SREF) is not provisioned for a clock source. |
| SCH5901 | Either no card exists in this slot, or the slot must be a DTI2, JDMI, or PRI2 slot. |
| SCH5902 | Either the card in this slot is not a BRI SILC line card, or the slot must be a DTI2, JDMI, or PRI2 slot. |
| SCH5903 | Either DSL #1 in this slot is not a trunk DSL, or the slot must be a DTI2, JDMI, or PRI2 slot. |
| SCH5904 | Either DSL #1 in this slot is not provisioned for a clock source, or the slot must be a DTI2, JDMI, or PRI2 slot. |
| SCH5905 | The appropriate DSL on this card (DSL #0 for PREF or DSL #1 for SREF) is not configured. |
| SCH5906 | Either DSL #1 in this slot is not configured, or the slot must be a DTI2, JDMI, or PRI2 slot. |
| SCH5907 | The clock on this DSL is referenced in the Digital Data Block. Action: This reference must be removed in LD 73 before the mode can be changed to NT. |
| SCH5908 | The clock on this DSL is referenced in the Digital Data Block. Action: This reference must be removed in LD 73 before the CLOK can be changed to NO on this DSL. |
| SCH5909 | The asterisk (*) is not a valid entry for this prompt. |
| SCH5910 | Cannot remove or change a 500 telephone if its DN is equal to ALDN of the CDB. Action: You must remove or change ALDN first. |
| SCH5911 | The Move function for the entered card input is temporary denied due to SET/TRK installation/relocation is in process. The Move function will be permitted as soon as the installation/relocation process is completed. |
| SCH5912 | NPD ID out-of-range (0-9). |
| SCH5913 | Invalid NPA format. |
| SCH5914 | Invalid response to TRMT prompt. Valid responses are NONE, TEST, FAIL, NPA, or {CR}. |
| SCH5915 | Type of NPID allowed only if M911 package 224 is equipped. |
| SCH5916 | {CR} not allowed as valid input for IDTB prompt for NEW command. |
| SCH5919 | The clock on this DSL is referenced in the Digital Data Block. Action: This reference must be removed in LD73 before the DSL can be outed. |
| SCH5923 | LAPW is not allowed without Multi-User Login (MULTI_USER) package 242. |
| SCH5924 | Duplicate login name entered. |
| SCH5925 | Login name must be defined when LNAME_OPTION is YES. |
| SCH5926 | The clock on this DSL is referenced by the DTI2/PRI2 system data. Action: This reference must be removed in LD 73 before the mode can be changed to NT. |
| SCH5927 | The clock on this DSL is referenced by the DTI2/PRI2 system data. Action: This reference must be removed in LD 73 before the CLOK can be changed to NO on this DSL. |
| SCH5928 | The clock on this DSL is referenced by the DTI2/PRI2 system data. Action: This reference must be removed in LD 73 before the DSL can be outed. |
| SCH5929 | DTI package is restricted. Action: If the BRIT package is equipped, enter TYPE = DTI2 or TYPE = PRI2. |
| SCH5930 | The slot number is not a valid DTI/PRI/MISP slot. |
| SCH5931 | The slot number is not a valid DTI2/PRI2/MISP slot. |
| SCH5932 | This MISP is referenced as a clock controller in the Digital Data Block. Action: This reference must be removed in LD 73 before the MISP can be outed. |
| SCH5933 | This MISP is referenced as a clock controller in the DTI2/PRI2 system data. Action: This reference must be removed in LD 73 before the MISP can be outed. |
| SCH5934 | Answer supervision is selected and you cannot configure MR feature. Action: Go to LD 14 to reset answer supervision. |
| SCH5936 | The CWNT package must be enabled to assign CWNA Class of Service to a telephone. |
| SCH5937 | The M911 Package must be enabled to assign USMA Class of Service to a telephone. |
| SCH5938 | The requested change cannot be processed because the route would be changed to USR
side, but there are NT mode DSL members on this route. Action: NT mode DSLs must be on NET side. |
| SCH5939 | This is not an SILC card. This slot is valid input only for SILC clock references. |
| SCH5941 | That feature is not included in this package. |
| SCH5942 | Autobaud overwrites configured baud rate. |
| SCH5943 | x y MSDl SDI function conflicts with user type, the PARM setting or the BITL setting.
The first conflicting pair is shown. Where: x = user type (e.g. APL, PMSI); DCE if MOD is specified; BITL if LME is specified y = MSDL SDI function (e.g. LME, ABD) |
| SCH5944 | DTE must be specified for a PRT device. |
| SCH5945 | MSDL SDI package is not equipped. Action: Redefine the TTY/PRT on a non-MSDL SDI port. |
| SCH5952 | Cannot have more than one CSL for CCR VAS ID. |
| SCH5953 | Cannot take out CSL link that has a reverted DN. |
| SCH5956 | Cannot add Vas ID that has more than one link to a cdn. |
| SCH5957 | At least one TRF user must be defined for a TTY or the History File. |
| SCH5958 | The primary PMSI port was removed in LD 17 (ADAN OUT xx). The retransmission, polling, and message monitoring will not be serviced. |
| SCH5959 | That port number is either undefined, or not a PMSI port. |
| SCH5960 | The input is beyond the allowed range for the PMCR prompt. The allowed range is 5 to 250 or 25 percent of total system Call Registers, whichever is less. |
| SCH5961 | Either the Ack timer (XTMR), or Polling timer (PTMR) is outside the range. The allowed ranges are XTMR = 0-6 and PTMR = 0-31. |
| SCH5962 | The number of re-transmission (XNUM) is outside the allowed range. The accepted range is 0-4. |
| SCH5963 | The polling Call Register was not allocated during wrap-up time in LD 17. |
| SCH5964 | The number of PMCRs will be recalculated because the number of system Call Registers was reduced. |
| SCH5970 | MFX Class of Service requires a DID trunk. |
| SCH5971 | MFX Class of Service requires a IAO trunk. |
| SCH5973 | A link is removed from a Vas ID that is defined for one or more CDN. Action: Provide a new link. |
| SCH5974 | Timer T2 should be smaller than T1. |
| SCH5975 | Timer T3 should be greater than T1 when T3 is not zero. |
| SCH5976 | Cannot remove the protocol group because at least one MPH network interface or TSP
refers to it. Action: Remove the association of the protocol group from the MPH network interface or the TSP. |
| SCH5977 | Meridian 1 Packet Handler package not included. |
| SCH5978 | DNA/NTN does not exist in the table. |
| SCH5979 | DNA/NTN already exists in the system. |
| SCH5980 | The input TN has been used by another network interface. |
| SCH5981 | MPH maintenance B channel time slot request failed. |
| SCH5983 | DNA table does not exist. |
| SCH5984 | DNA table already exists. |
| SCH5986 | DNA/NTN has too many digits. NTN maximum size is 10 digits, or DNA maximum is 14 digits. |
| SCH5987 | Local DNA tables overflow. NTN of TSP (USID) DSL (TN) will not be in the local tables. |
| SCH5988 | NTN does not exist in any DNA table associated with the MPH, or MPH network interface. |
| SCH5989 | DNA table overflows. |
| SCH5990 | Only MPHI and OPE can be easy changed when MPHI = Yes. |
| SCH5991 | The input TN is used by D-channel packet data. |
| SCH5992 | The input MPH loop does not exist. |
| SCH5993 | Invalid entries for the LCN range Action: Enter the lowest LCN first, then the highest. |
| SCH5994 | Invalid order of LCN range selection. The lowest LCN has to be larger than the highest LCN of any configured LCN ranges. |
| SCH5995 | Cannot use this NTN because it is associated with a TSP. |
| SCH5996 | The input DNA table is used by another MPH network interface or another MISP. |
| SCH5997 | Exceed the maximum number if B-channel connections. Action: Enter another available MPH loop number. |
| SCH5998 | DSL B channel call type is not IPD. |