SCH4200 - 4299
||CLS of AAA and FNA conflict.
||No Authcode table defined for this customer.
||VNET route has changed to NON-VNET route. CMFI contained greater than 2 levels of
signaling, so it was zeroed.
||VNET route has changed to NON-VNET route. ISST has been zeroed.
||60 or 70 ms is not supported when TDSO = NO, or 50 ms is not supported when TDSO =
||TTY 15 is reserved for HIST file.
||BGD or PMS not allowed for user prompt if device is PRT.
||Numeric input out of valid range (1-9).
||Auto and R2 mode cannot be configured at the same time. Auto takes precedence and R2
mode feature will be turned off.
||Empty block is not allowed.