Mike's PBX Cookbook

SCH1900 - 1999

SCH1900 Warning! The daughterboard type is not 100baseT or 100baseF in the cabinet you configured your card.
SCH1921 A corrupted DPNSS/DASS2 trunk is observed.
Action: Report the problem.
SCH1922 Specified port not an IP port.
SCH1923 ISM limit for survivable expansion cabinets exceeded.
SCH1924 Not possible to set survivable capability to NO when IP expansion cabinet is in survival mode.
SCH1925 Not possible to set survivable capability to NO when IP link is down.
SCH1937 The number of ITG ISDN Trunks in the system exceeds the maximum number allowed.
SCH1938 Last RCFA FFC cannot be deleted while FOLM and FWDT FFCs are configured.
Action: Remove existing FOLM and FWDT FFCs.
SCH1939 Last ERCFW (FOLM or FWDT) FFC cannot be deleted while sets are configured with CLS = ERCA.
Action: Ensure CLS = ERCD for all sets in the customer.
SCH1940 CLS = ERCA not accepted. Neither FOLM nor FWDT FFC configured.
Action: Configure at least one of FOLM or FWDT FFC in LD 57.
SCH1941 Warning: Only one of FOLM or FWDT configured.
SCH1942 Virtual Terminal must be defined on a phantom loop (Overlay 11).
SCH1943 Virtual Terminal is not allowed to be copied (CPY) or moved (MOV) (Overlay 11).
SCH1944 Virtual and Host Terminals are not allowed to be changed (CHG) removed (OUT) copied (CPY) or moved (MOV) when the VO Worker is logged in (Overlay 11).
SCH1945 The primary DN of a Virtual Terminal is not allowed to be a primary DN for any other TN and must be defined as the MARP DN (Overlay 11).
SCH1946 Virtual Office package is not equipped (Overlay 1120).
SCH1947 Feature (Key or CLS) is not configurable on Host or Virtual Terminals (Overlay 11).
SCH1948 Host or Virtual Terminals cannot be monitored by the BFS key (Overlay 11).  
SCH1949 Service change (CHG OUT CPY or MOV) is not allowed on Host or Virtual Terminals during Virtual Office Swap process on them (Overlay 11).
SCH1950 Service change is not allowed on Host or Virtual Terminals (Set Base Administration Attendant Administration).
SCH1951 The Virtual Terminal DN cannot be member of a DND group.
SCH1952 Physical I/O dress already in use in the specified network group; physical I/O address already in use for this Option 11C cabinet.
SCH1953 Physical I/O address already used by a non-MSDL device in a different network group/cabinet. This address can be used in the specified group only for an MSDL running only DCH.
SCH1954 Physical I/O address already used by an MSDL device (running an application different from DCH) in a different network group/cabinet only for an MSDL running only DCH.
SCH1955 Error in request. Either the software is not IP equipped or command can only be used on main cabinet.
SCH1956 You are attempting to configure DBA with a KBA attached to the set.
Action: First input 0 with KBA prompt and then configure 1 with DBA prompt.
SCH1957 You are attempting to configure KBA with a DBA attached to the set.
Action: First input 0 with DBA prompt and then configure 1 or 2 with KBA prompt.  
SCH1958 Command is blocked since Midnight download is triggered for the M3900 set type.
SCH1960 <link#> ABORT OVERLAY <##> NOW! Application’s action on link# requires the specified overlay to terminate immediately.
Action: Craftperson must terminate the overlay service change activities by ** or ****.
SCH1961 You are configuring key 5 to a mnemonic other than NUL (for the Application key) on this 3905 set. Redefining this key overrides the user’s access to remote applications.
Action: First change STSA to STSD or CRPA to CRPD and then configure key 5 to a non-NUL feature.
SCH1962 You are enabling either Corporate Directory or Set to Set Messaging when key 5 is not NUL on the M3905.
Action: Please NUL key 5 first and then input STSA or CRPA at the CLS prompt.  
SCH1963 Only 16 serial I/O and DCH devices are allowed per cabinet. (CPU TTYs are not counted against this count of 16 devices.)
SCH1964 Virtual Office terminals (Host and Virtual) cannot be defined as Data TN.  
SCH1965 DN of Virtual terminal cannot be defined on a Host terminal and vice versa  
SCH1966 I2004 sets have to be defined on virtual superloops.
SCH1967 I2004 unit type only is allowed on virtual superloops.
SCH1968 Key 0 must be a DN key on an i2004 set (I.e. one of SCR SCN MCR MCN PLN PLR ACD DN).
SCH1970 Message Waiting Key (MWK) must be defined on key 16 on an i2004 set.