CS1000 Circuit cards
When Meridian 1 systems are upgraded to run Avaya CS 1000 Release 7.0 software and configured to include a Signaling Server, they become Communication Server 1000 systems. The following Meridian 1 systems can be upgraded to a Communication Server 1000 system.
| This Meridian 1 PBX | Becomes this Avaya CS 1000 | |
|---|---|---|
| Option 11C Chassis | → | CS 1000E |
| Option 11C Cabinet | → | CS 1000E |
| Option 61C | → | CS 1000M SG (Single Group) |
| Option 81C | → | CS 1000M MG (Multi Group) |
Note: A CS 1000M has a network shelf, whereas a CS 1000E does not.
Media Gateways replace Intelligent Peripheral Equipment (IPE) shelves.
The following systems are referred to generically as Media Gateways:
- MG 1000E chassis (NTDK91) and Expander chassis (NTDK92) - legacy hardware
- MG 1000E chassis (NTDU14) and Expander chassis (NTDU15)
- MG 1000E cabinet (NTAK11) - legacy hardware
- MG 1010 chassis (NTC310)
Circuit Cards:
The following circuit cards are supported for Avaya Communication Server 1000 (Avaya CS 1000).
| NT1R20 | Off-Premise Station Analog Line card | The NT1R20 Off-Premise Station (OPS) analog line card provides eight full-duplex analog telephone line interfaces for 2-wire analog terminal equipment such as 500/2500 type telephones and analog modems. |
| NT4N39AA | CP Pentium IV Card | The NT4N39AA Call Processor Pentium IV (CP PIV) System processor card was introduced in Avaya Communication Server 1000 (CS 1000) Release 4.5. |
| NT5D11, NT5D14 | Lineside T1 Interface cards | The NT5D11/14 Lineside T1 Interface card is an intelligent 24-channel digital line card that is used to connect the switch to T1-compatible terminal equipment on the lineside. It emulates an analog line card to the system software. This card occupies two card slots in the main or expansion cabinets. |
| NT5D33, NT5D34 | Lineside E1 Interface cards | The NT5D33/34 Lineside E1 Interface card is an intelligent 30-channel digital line card that is used to connect the switch to E1-compatible terminal equipment on the lineside. It emulates an analog line card to the system software. This card occupies two card slots in the main or expansion cabinets. |
| NT5D60/80/81 | CLASS Modem card (XCMC) | Supports the Custom Local Area Signaling Services (CLASS) feature. It receives Calling Number and Calling Name Delivery (CND) data and time/date data from the Avaya CS 1000E, CS 1000M, and Meridian 1, and transmits it to an Analog line port. CLASS Modem cards are housed in NT8D37 IPE modules. |
| NT5D97 | Dual-port DTI2 PRI2 card | The NT5D97 is a dual-port 2.0 Mb DTI2/PRI2 card which occupies a single slot in the Network shelf. It integrates the functionality of two NT8D72BA PRI2 cards, and one QPC414 ENET card. Interfaces with an external D-Channel Handler, eg: the NT6D80 Multi-purpose Serial Data Link card. |
| NT5K02 | Flexible Analog Line card | Provides an interface for up to 16 analog (500/2500 type) telephones equipped with either ground button recall switches, high-voltage or low-voltage Message Waiting LEDs. Up to four NT5K02 Flexible Analog Line cards are supported in each Media Gateway and Media Gateway Expansion. |
| NT5K21 | XMFC/MFE card | The XMFC/MFE (Extended Multi-frequency Compelled/Multi-frequency sender-receiver) card is used to set up calls between two trunks. Install in any IPE slot. |
| NT6D70 | SILC Line card | The S/T Interface Line card (SILC) (NT6D70AA -48V North America, NT6D70BA -40 V International) provides eight S/T four-wire full-duplex interfaces to connect ISDN BRI compatible terminals over Digital Subscriber Loops (DSLs) to the System. You can install in any IPE slot. |
| NT6D71 | UILC line card | The UILC provides eight two-wire full-duplex (not polarity sensitive) U interfaces to connect ISDN BRI-compatible terminals over Digital Subscriber Loops (DSL). Install in any IPE slot. |
| NT6D80 | MSDL card | Multi-purpose Serial Data Link (MSDL) card, provides four full-duplex serial I/O ports that can be independently configured for various operations. An MSDL card occupies one network card slot (CS 1000M). |
| NT7K20 | Global Analog Line Card | The NT7K20 GALC provides talk battery and signaling for up to 16 regular 2-wire common battery analog (500/2500-type) telephones, with the Message Waiting lamp feature. NT7K20 is an analog line card for global market. |
| NT8D02 | Digital Line card | The NTDK02 Digital Line card provides 16 voice and 16 data communication links. Install in any IPE slot. |
| NTDK16 | Digital Line card | The NTDK16 is a 48 port card supported only in the Chassis system. It is functionally equivalent to three NT8D02s, and configured as cards 4, 5, and 6 in the main chassis. Can only be installed in slot 4 of the main. |
| NT8D09 | Analog Message Waiting Line card | The NT8D09 provides talk battery and signaling for up to 16 regular 2-wire common battery analog (500/2500-type) telephones, with the Message Waiting lamp feature. Install in any IPE slot. |
| NT8D14 | Universal Trunk card | The NT8D14CA Universal Trunk (XUT) card is a replacement for the NT8D14BB card, and interfaces eight analog trunk lines to the system. Install this card in any IPE slot. |
| NT8D15 | E and M Trunk card | The NT8D15 E and M Trunk card interfaces four analog telephone trunks to the switch. Install in any IPE slot. |
| NTAG26 | XMFR card | The XMFR (Extended Multi-frequency receiver) card is used to receive MF digit information. Connections are made between a PBX and a central office. The XMFR card can only operate in systems using μ-law companding. Install this card in any IPE slot. |
| NTAK02 | SDI/DCH card | The optional SDI/DCH card provides up to four serial I/O ports. Ports 1 and 3 are configured as DCH. Ports 0 and 2 are configured as SDI (not supported). Supported in the Media Gateway (slots 1 to 4) only for the ISDN Signaling Link (ISL) D-channel. |
| NTAK09 | 1.5 Mb DTI/PRI card | The NTAK09 provides 1.5Mb ISDN primary rate interface and digital trunk interface capability. The NTAK09 can be equipped with two daughterboards: the NTAK20 clock controller and the NTAK93/NTBK51 D-channel handler interface. You can install this card in slots 1 through 4 in the Media Gateway. |
| NTAK10 | 2.0 Mb DTI card | The NTAK10 2.0 Mb DTI card is a digital trunk card that provides an IPE-compatible 2.0 Mb DTI interface. Includes an on-board clock controller. You can install this card in slots 1 through 4 in the Media Gateway. |
| NTAK20 | Clock Controller daughterboard | The NTAK20 clock controller daughterboard mounts directly on the following cards: NTAK09 1.5Mb DTI/PRI, NTBK50 2.0 Mb PRI, NTRB21 DTI/PRI/DCH TMDI, NTBK22 MISP, NT6D70 SILC, NT6D71 UILC |
| NTAK79 | 2.0 Mb PRI card | The NTAK79 2.0 Mb Primary Rate Interface (PRI) card provides a 2.0 Mb interface and an onboard D-channel handler (DCH). The NTAK79 card also includes an onboard clock controller (equivalent to the NTAK20) |
| NTDW79AAE5 | Universal Digital Trunk card | The UDT card (and NTDW12AAE5 CC daughterboard) replaces NTAK79, NTAK10, NTBK50, NTRB21, NTAK20, NTAK93, NTAK09 and includes onboard DDCH/DCHI functionality. One DIP switch for E1/T1 mode setting. |
| NTAK93 | D-channel Handler Interface daughterboard | The NTAK93 provides the D-channel handler interfaces required by the ISDN PRI trunk. It is mounted on the NTAK09 1.5 Mb DTI/ PRI card or the NTBK50 2.0 Mb PRI card (installed in the Media Gateway). |
| NTBK22 | MISP card | The NTBK22 Multi-Purpose ISDN Signaling Processor (MISP) card is a microprocessor- controlled signaling processor that performs Data Link (Layer 2) and Network (Layer 3) processing associated with ISDN BRI and the OSI protocol. You can install this card in slots 1 through 4 in the Media Gateway. |
| NTBK50 | 2.0 Mb PRI card | Provides a 2.0 Mb PRI interface. It supports the NTAK20 clock controller daughterboard and either the NTAK93 D-channel interface or the NTBK51 Downloadable D-channel handler. Slots 1 - 4 in the MG. |
| NTBK51 | Downloadable D-channel Handler daughterboard | The NTBK51 daughterboard interfaces with the system CPU and is mounted on either the NTAK09 1.5 DTI/PRI card or the NTBK50 2 Mb PRI digital trunk card. |
| NTCK16 | Generic Central Office Trunk cards | The NTCK16 generic Central Office trunk cards support up to eight analog Central Office trunks. This card can be installed in any IPE slot. |
| NTDW12AAE5 | Universal Clock Controller daughter board | NTDW12AAE5 Universal Clock Controller daughter board can be mounted only on the NTDW79AAE5 UDT E1/T1 card. It cannot be mounted on any other Avaya digital trunk card, e.g. NTBK50, NTAK09. |
| NTDW60 | Media Gateway Controller Card | The NTDW60 Media Gateway Controller (MGC) card provides a gateway controller for MG 1000E IP Media Gateways in an Avaya Communication Server 1000E (Avaya CS 1000E) system. Occupies slot 0 in MG. |
| NTDW20 | Media Gateway Extended Peripheral Equipment Controller card | The NTDW20 Media Gateway Extended Peripheral Equipment Controller (MG XPEC) is a dual card assembly based on Media Gateway Controller (MGC) hardware, and includes 192 DSP channels (2x DB-96) on-board. This card replaces the Extended Peripheral Equipment Controller (XPEC) card in an IPE shelf. |
| NTDW56, NTDW59 | Common Processor Media Gateway card | The CP MG card design is based on the CP PM card and MGC card with DSP daughterboards. NTDW56BAE6: with 32 DSP ports, NTDW59BAE6: with 128 DSP ports |
| NTDW53, NTDW54 | Common Processor Dual Core card | The CP DC card requires the Linux Base Operating System, and supports Co-resident Call Server and Signaling Server, or stand-alone Signaling Server configurations. Occupies slot 0 in a Media Gateway. |
| NTDW61, NTDW66 | Common Processor Pentium Mobile Card | The CP PM cards provide a platform for applications including Call Server and Signaling Server, storage of system and customer data and they provide various Ethernet network interfaces. |
| NTDW62, NTDW64, NTDW78 | Media Gateway Controller Daughterboards | The NTDW60 or NTDW98 Media Gateway Controller (MGC) card has two expansion sites for DSP daughter boards. These are available in three sizes: NTDW62 32-port (DB-32), NTDW64 96-port (DB-96), and NTDW78 128-port (DB-128).The DBs are slave devices controlled by the MGC processor. |
| NTDW65 | Voice Gateway Media Card | The NTDW65 MC32S Media Card provides 32 IP-TDM gateway ports between an IP device and a TDM device in an Avaya CS 1000 network. The MC32S replaces the previous media card or ITG card. IPE form factor. |
| NTDW98 | Media Gateway Controller Card | The NTDW98 MGC card is functionally identical to the NTDW60, but contains a metal faceplate for enhanced EMC containment. Avaya recommends you use a NTDW98 MGC card in the Media Gateway 1010 (MG 1010). |
| NTRB21 | DTI/PRI/DCH TMDI card | The NTRB21 (DTI/PRI/DCH) TMDI digital trunk card is a 1.5 Mb DTI or PRI interface to the Avaya CS 1000, and Meridian 1 PBX 11C Cabinet (slots 1-4). The NTRB21 card has a built-in downloadable D-channel. |
| NTVQ01xx | Media Card | The Media Card replaces the ITG Pentium card, available in two versions: 8-port and 32-port. Slots 1-4. |
| NTC314AAE6 | Media Gateway utility card | The MGU provides connectivity to the three serial ports of the MGC inserted in slot 0 and to the two serial ports of each call processor card inserted in slots 22 and 23, plus ring and message waiting voltages. |
| QPC841 | Quad Serial Data Interface card | The QPC841 Quad Serial Data Interface (QSDI) card provides four RS-232-C serial ports between the system and external devices. It plugs into a slot in the common equipment area (Network module) of any system. |