Mike's PBX Cookbook

SCH1800 - 1899

SCH1867 Warning: The ISA master route cannot have any RLI pointing towards itself.
Action: Check whether this route is associated with any RLI. Remove all RLI’s associated with this route.
SCH1868 Class of service being changed to SPCD as the class of service has been changed to MID.
SCH1869 SPCA Class of service only allowed for IPE, TIE, E&M trunks with MIA class of service.
SCH1870 The number of digital TN’s in the system exceeds the number of digital TN’s defined in the tape directory.
SCH1871 The number of analog TN’s in the system exceeds the number of analog TN’s defined in the tape directory.
SCH1872 WARNING: It is recommended that a non-CallPilot CDN be configured here.
Action: Please ensure that the CDN you are configuring as an AODN is a CallPilot CDN. The CDN you have entered will be accepted if you continue through the Overlay. However, if you have entered a non-CallPilot CDN, please leave the Overlay (****) and re-enter, or re-start the Overlay (**).
SCH1873 Key 7 is blocked on this set.
SCH1874 Attempt to configure RCAP UUS1 without BNE package equipped.
SCH1875 RCAP UUS1 only allowed for EURO/E403.
SCH1876 Attempt to configure RCAP with a EuroISDN diversion remote capability whereas the BNE package is restricted. Do not configure the unexpected remote capability as it has no effect without the missing package.
SCH1880 The number of ISDN B Channel TNs in the system exceeds the maximum number allowed.
SCH1881 The number of DTI Channel TNs in the system exceeds the maximum number allowed.
SCH1882 The number of Analog Trunk Tns in the system exceeds the maximum number allowed.
SCH1883 The number of Data Port TNs in the system exceeds the maximum number allowed.
SCH1884 The number of Phantom Port TNs in the system exceeds the maximum number allowed.
SCH1885 The number of CLASS Telephone TNs in the system exceeds the maximum number allowed.
SCH1886 The number of Attendant Consoles TNs in the system exceeds the maximum number allowed.
SCH1892 Corporate Directory not allowed without corporate Directory Package.
SCH1893 Corporate Directory not allowed for this set type.
SCH1894 Set to Set Messaging not allowed without Set to Set Messaging Packages.
SCH1895 Set to Set Messaging not allowed for this set type.
SCH1896 No default cab type allowed when entering the first tty for each expansion cab.
SCH1897 MOV PAIR command is not allowed across different card types (CTYP: XDLC/ EDLC).