Mike's PBX Cookbook

ERR5200 - 5299

ERR5231 No outgoing ESDI packet allowed when the ESDI card is disabled.
Output: {aml number in decimal}.
ERR5232 No incoming ESDI packet allowed when the ESDI card is disabled.
Output: AML: {aml number in decimal}.
ERR5233 The MSDL AML port is disabled. Therefore the incoming AML message is disregarded.
Output: AML: {aml number in decimal}.
ERR5234 The given AML (i.e., CLS) priority is disregarded.
Output: AML: {aml number in decimal} PRIO: {msg_priority in decimal}
ERR5235 The MSDLMISP_HDLR handler failed the outgoing XDU MSDL AML request.
Output: AML: {aml number in decimal} CODE: {msdlmisp_hdlr failure code in decimal}
ERR5236 The MSDLMISP_HDLR handler failed the outgoing DU MSDL AML request.
Output: AML: {aml number in decimal} CODE: {msdlmisp_hdlr failure code in decimal}
ERR5237 The GET_O_BUF procedure failed to find a free outgoing buffer to send an outgoing AML MSDL packet. Output: AML: {aml number in decimal}.
ERR5241 NIL pointer passed in as a parameter. Unable to update the TN block with the wake up information. Cannot proceed. Procedure WRT_AWU_TN.
ERR5242 NIL pointer to the HM_STRUCT which contains the wake up information. Cannot update and cannot proceed. Procedure WRT_AWU_TN.
ERR5243 tn Digit collect message received from RAN trunk unit.
ERR5244 type tn An invalid problem type has been received in a problem report message.
ERR5245 type tn An invalid message type has been received from a card or unit.
ERR5252 The SDI I/F Handler could not retrieve a free buffer to send an outgoing message.
ERR5254 The SDI I/F Handler encountered a problem transmitting an expedited message
ERR5255 The SDI I/F Handler encountered a problem transmitting a standard ring message.
ERR5256 The SDI I/F Handler received a data.indication primitive with a length of zero.
ERR5257 The SDI I/F Handler received a data.indication primitive but could not store incoming characters because the TTY input buffer is full. Incoming characters were discarded.
ERR5258 The SDI I/F Handler received a data.indication primitive but could not store all incoming characters because the TTY input buffer became full. Some incoming characters were discarded.
ERR5259 The SDI I/F Handler received an incoming message that had an unsupported primitive ID.
ERR5260 The SDI I/F Handler received an incoming message that was not in the correct MSDL ring or expedited buffer.
ERR5261 The SDI Port was disabled because the number of response timeouts on a output primitive has been exceeded.
ERR5262 The SDI I/F Handler received a message from a port that is not enabled.
ERR5263 The SDI I/F Handler received an incoming message that could not be processed in the current SDI state.
ERR5264 The SDI I/F Handler received a data.indication message that had more characters than the maximum size of the TTY input buffer. The message is discarded.
ERR5266 The SDI I/F Handler received a maintenance primitive message with an invalid data length. The primitive message is discarded.
ERR5267 The SDI I/F Handler encountered a problem when trying to resynchronize flowcontrol variables with the MSDL I/F Handler.
ERR5272 tn An invalid maintenance message has been received from a card.
ERR5275 The DCH timed out while waiting for a test mode state change.
ERR5276 DCH: {DCH NUMBER} {DCH LINK STATE} An SSD message to process the MSDL DCH output request queue is found to be lost. No action is required by the craftsperson.
ERR5277 An invalid DCH link state was found and corrected.
ERR5278 The DCH state was found to be disabled, while the DCH port was disabled.
ERR5279 Application state was disabled, while the port on the MSDL card was enabled.
ERR5280 Wrong Optional Information Element Length.
ERR5281 Pointer BG_TFC_TODAY_PTR or BG_TFC_YESDY_PTR is NIL because of the low memory problem or the memory corruption.
Action: Manually INIT the system to rebuild memory blocks. If manual INIT still does not work, you should add more memory cards or remove data from the system.
ERR5282 c dn r Warning: Undefined RAN route for night RAN. Where: c = customer number, dn = ACD DN, r = route number.
Action: Define the RAN route and trunk in LD 16 and LD 14, then enter the route number at prompt NRRT in LD 23 for the ACD DN.
ERR5283 No message sent to the ICP computer.
Action: Update the computer database manually.
ERR5284 The DCH port on the MSDL card was found to be enabled, while the MSDL card was not operational.
ERR5285 c dn r Warning: Undefined RAN route for first RAN. Where: c = customer number, dn = ACD DN, r = route number.
Action: Define the RAN route and trunk in LD 16 and LD 14, then enter the route number at prompt FRRT and connection timer at prompt FRT in LD 23 for the ACD DN.
ERR5286 c dn r Warning: Undefined RAN route for second RAN. Where: c = customer number, dn = ACD DN, r = route number.
Action: Define the RAN route and trunk in LD 16 and LD 14, then enter the route number at prompt SRRT and connection timer at prompt SRT in LD 23 for the ACD DN.
ERR5287 Invalid routing data encountered for Network Call Pickup/TAFAS. Digits do not indicate a valid DSC/TSC/AC1/AC2 route access code to route the Call Pickup request.
Home » Meridian » Maint » Err » Err5200 5299