Mike's PBX Cookbook

Security Domain Status

To check the security domain status of all devices (elements), use the command:

To register a device, use the command:

NOTE: An MG Xpec card (MGX) will have two IP addresses – one for shelf 0, the left side, and one for shelf 1, the right side.

For example, an MG Xpec in loop 8 might have:

To replace an MG Xpec, follow the procedure: Replacing an MG Xpec.

>LD 117
=> stat u i
The Security Domain IP address is : 10.11.1.15
The Security Domain Fingerprint is: 4B:65:D9:D9:6E:DF:C1:7E:86:19:B0:A5:A4:EA:44:80

=> stat u s
MGX          10.11.1.50      REGISTERED
MGX          10.11.1.47      REGISTERED
MGX          10.11.1.45      REGISTERED
MGX          10.11.1.46      REGISTERED
MGX          10.11.1.49      REGISTERED
MGX          10.11.1.48      REGISTERED
MGC          10.11.1.41      REGISTERED
MGC          10.11.1.42      REGISTERED

If an element is not registered, follow the procedure: Check Registered Elements

To get the IP address assignments of all IPMG’s

=> prt ipmg
 IPMG               IP Address          Zone   Type 
000 0               10.11.1.41          1      MGC  
000 1               10.11.1.42          1      MGC  
008 0               10.11.1.45          1      MGX  
008 1               10.11.1.46          1      MGX  
012 0               10.11.1.47          1      MGX  
012 1               10.11.1.48          1      MGX  
016 0               10.11.1.49          1      MGX  
016 1               10.11.1.50          1      MGX  
Home » Meridian » Maint » Domstat