Mike's PBX Cookbook

Bcm Contents

Show All: By Date:

BCM 400 Re-image Guide
BCM 400 3.X Software Image Installation Guide

Accessing the BCM50 system
Logging into a Business Communications Manager (BCM)

BCM-50 Main Unit Wiring
4 lines, 4 analog sets, and 12 digital sets connect to the RJ-21 Amphenol connector

BCM-50 Station Module Wiring
Use this table if connecting extensions (stations) to a Expansion Media Bay Module.

BCM-50 Trunk Module Wiring
Use this table if connecting trunks (lines) to a Expansion Media Bay Module.

BCM50 Expansion Unit
A BCM50 Expansion Unit increases the capacity of the system.

Find/Set BCM IP Address
How to find the system IP address details on an unknown BCM 50

Telset Administration
Using a 2 line digital set for BCM 50 administration

System Startup
Startup erases all programming and resets the BCM to a factory default state.

BCM450 Installation Notes
Use as a quick reference to prepare the Business Communications Manager for installation.

Enable CDR on a BCM
How to enable Call Detail Recording on a BCM, for use with Call-Cost-Accounting software: eg, CallBill

BCM Expansion Unit
The Business CommunicationsManager expansion unit contains six additional bays for media bay modules.

BCM First Time Installation Guide
The Quickstart Wizard provides access to the initial BCM configuration parameters. You access it using a web browser running on another computer.

Linking an Option 11 to a BCM
Procedure to link an Option 11 to a BCM with transparent co-ordinated dialing (CDP) and centralised voice mail, using the proprietary SL-1 protocol (the BCM requires a keycode), over a private PRI circuit (E1).

BCM Phone Guides
Descriptions and User Guides for BCM compatible telephones

Telset Configuration Tree
An overview of the Telset programming levels available to a BCM50 system installer or administrator.

BCM Backup/Restore
How to Backup or Restore a Business Communications Manager (BCM) configuration.

BCM-CallBill Installation Guide
How to configure a BCM to FTP-PUSH the CDR data to the CallBill Record Processor

BCM Clear Alarms/LED
How to clear a Business Communications Manager (BCM) front panel alarm LED.

BCM Model Comparison
The

BCM Cold Reset
Recommended procedure for shutting down the Business Communications Manager (BCM) prior to installing new media bay modules.

BCM 400 Hardware overview
Recommended procedure for shutting down the Business Communications Manager (BCM) prior to installing new media bay modules.

BCM50 Rls 6 Downloads
The following links can be used with a (non-java) browser to download applications from a Release 6 BCM50.

BCM 4.0 Change the Hold Music
How to upload and activate an alternative hold music to a BCM

BCM 400 Trouble Shooting Guide
Trouble Shooting Guide for the Business Communications Manager (BCM).

Faulty Base Function Tray
Some BCM200 and BCM400 system Base Funtion Trays were manufactured with faulty capacitors

System power and Status
BCM base function tray, expansion, and module power and status LED indicator descriptions.

DSM DIP Switch Settings
BCM Digital Station Module DIP switch settings, supporting M and T series handsets.

G4x16 Module Wiring
The 4x16 MBM has RJ-11 ports for connecting Analog Trunks, and an amphenol connection for connecting the Digital Stations.

G8x16 Module Wiring
The G4/8x16 MBMĂ­s is a combination of the GATM4/8 and DSM16(+) Media Bay Modules.

GATM DIP Switch Settings
BCM Analog Trunk Module DIP switch settings.

How to log on to a BCM
Illustrated procedure showing how to log on to a BCM using a PC or Laptop.

Installing BCM Modules
Procedure for installing or replacing Business Communications Manager (BCM) Modules

BCM200/400 Installation Overview
Use as a quick reference to prepare the Business Communications Manager for installation.

Shut down procedure
Recommended procedure for shutting down the Business Communications Manager (BCM) prior to installing new media bay modules.

Module Wiring Charts
Analog Trunk and Station Module wiring charts (Business Communications Manager)